MICROFLASH 8I PRINTER USER'S GUIDE

Using the Ribbon

Installing the Ribbon

The printer ships without a ribbon installed. To install a ribbon, perform the following:

1.Remove the ribbon from its packaging.

2.Open the printer’s cover.

3.Remove the orange “Open Printer” label from the locking lever (green knob).

4.Depress the locking lever to open the print mechanism.

5.Slide the printhead away from the edge of the printer (Figure 6).

6.Hold the ribbon by the flat handle.

7.Install the ribbon on the printhead (Figure 7).

 

 

 

Figure 6

 

Figure 7

8.On the ribbon, turn the knob counter-clockwise several times to fully seat the ribbon to the printhead (Figure 8).

Printhead

Knob

Figure 8

6

Page 6
Image 6
O'Neil For 8100 manual Using the Ribbon, Installing the Ribbon