Selecting and obtaining water: Before obtaining water, selection is carried out either by pressing the button for carbonated water (I) or the button for ordinary water (J). The actual choice is indicated by the button which lights up. The selection of water can be changed while the water is running.
Water is obtained by pressing a glass or other container against the opening
(M). Stop the water flow by moving the glass or container downwards away from the opening (M). Any water that drips or is spilled is collected in the drip bowl below the water dispenser. When the carbonated water is being obtained, there is a slight afterflow when the glass is removed. The drip bowl can be detached and emptied when necessary.
Lighting:
The water dispenser lighting (N) illumi- nates automatically when water is obtained.
For continuous lighting:
1.Make sure that the water dispenser is unlocked.
2.Then hold the button for ordinary water (J) pressed in for about three seconds until the illuminates.
The lighting then illuminates with about
50% of its full intensity.
To switch off the lighting:
1.Ensure that the water dispenser is unlocked.
2.Then hold the button for ordinary water (J) pressed in for about three seconds until the lighting goes out.
Indicator lamp for the water filter: The water dispenser is fitted with an indicator lamp (K) which shows when it is time to change the water filter. When the indicator lamp remains lit, the water filter has been utilised to about 80 % of its expected lifetime. In this situation, it is recommended that you buy a replacement filter. When the indicator lamp starts flashing, the water filter has been utilised to 100% of its lifetime. Replace the filter without delay.
After replacing the filter cartridge, see the section "Service during operation". The indicator lamp can be switched off by holding the button for ordinary water (J) pressed in for about three seconds until the indicator lamp goes out.
Carbon filter's function:
The
12