Electrolux ERES31800 manual To change the lamp, Change of carbon filter

Page 16

When the refrigerator is to be used again, rinse the system through thoroughly by draining off at least three litres (5 pints) of water.

If necessary, all systems containing water must be sanitized by ordering the necessary sanitizing kit through Electrolux Service Force Centre

(tel: +44 8705 929 929) or through our website www.electrolux.co.uk.

into a centred position and press until it snaps into place.

Use a halogen bulb of the same type, maximum rating of 20 W.

Service during operation

The water filter is replaced as follows: Place a piece of kitchen tissue or a dishcloth in the space under the filter. Remove the filter by turning it clockwise. A small amount of water will run out. Dry off and fit the new filter. See the section "When starting the water system for the first time".

The water connection does not need to be switched off when changing the filter.

Replacement filters can be ordered from Electrolux Service Force Centre. See the section "Service and replacement parts".

The gas cylinder is replaced as follows: remove the gas cylinder and transfer the adapter to the new cylinder.

The replacement gas cylinder is obtained through your local dealer.

To change the lamp

The light is switched on automatically when the door is opened. Before replacing the light bulb, disconnect the power plug from the outlet. Disassemble the lamp by using a screwdriver in the recess on the lamp insert. To prise it out of its location. Assemble a new lamp by guiding it

Change of carbon filter

To maintain the best performance the carbon filter should be changed once a year with normal usage.

New carbon filters can be purchased from your local dealer. The filter is placed behind the grill and can be reached by opening the cover. The cover can be opened by simulta- neously pressing the lever on the right of the grill (1) and turning the cover outward (2). The carbon filter is then pulled out of its slot (3).

The new carbon filter is placed in the existing slot - The filter should be handled carefully so fragments do not loosen from the surface.

1

2

3

 

16

Image 16 Contents
Instruction book Fri gerator We were thinking o f y ou Welcome to the world of Electrolux Scrapping old appliances Safety instructions Contents USE Control PanelSelect /Switch off /Switch on Temperature regulation First switch onFunctions Menu Switching off Ambient Temperature FunctionEco mode Function Child Lock FunctionChill Mode Function Use of the fridge compartment Temperature regulationDoor open acoustic alarm Holiday Function HFunctions of the water- dispenser For continuous lighting To switch off the lightingCarbon filters function Bottle- and can holder Cabinet interiorQuick chill shelf Dismantling of the bottle- and can holder Saving energyFood Storage Protect the environmentCleaning CleaningServicing and cleaning the water dispenser External CleaningTo change the lamp Change of carbon filterProblem Possible cause / Remedy Something not WorkingSound level in cabinet is too HighCabinet does not operate Lamps lightTecnical Spicification Installation CleaningUnpacking Remove the transport supportsInstallation of carbon filter Connecting the water hoseElectrical cord Installing the cabinetTo obtain the best performance from the cabinet, ensure When the water system is started for First time ClimateClassifi CationRe-hanging the door Electrical con n ectionPage Guarantee/Customer Service Rr. Pjeter Bogdani Nr Tirane LU4 9QQ Page Page Page 8184108-00/2