Electrical cord
Do not remove the power cord by pulling on its lead, particulary when the product is being pulled out of its niche.
·Damage to the cord may cause a
·In the event of damage to the appliance's main cable, only an authorised service company recommended by the manufacturer or a similarly qualified person may adjust it in order to avoid shock hazard for the user.
Installing the cabinet
When two appliances are placed beside each other, the spacers enclosed in the plastic wrapping should be glued between the appliances. As shown in the illustration.
Make sure that the power plug is not squashed or damaged by the back of the product.
·A damaged power plug may overheat and cause a fire.
Do not place heavy articles or the product itself on the power cord.
·there is a risk of a short circuit and fire.
If the power plug socket is loose, do not insert the power plug.
·there is a risk of electric shock or fire.
To obtain the best performance from the cabinet, ensure:
·the cabinet is placed in a dry, cool place and is not exposed to direct sunlight.
·the cabinet is not placed close to a source of heat, e.g. a cooker or dishwasher.
·the cabinet is level. The cabinet should not lean against any wall. If necessary adjust the feet using the adjustment spanner supplied.
·there is good air circulation around the cabinet and that the air channels below and behind the cabinet are not blocked. The ventilation space above the cabinet must be at least 4 cm.
The ventilation space can either be a) directly above the cabinet, or
b) behind and above the top cupboard. In this case, the space behind the cupboard must be at least 50 mm deep.
a) | b) | 50mm |
22