Electrolux ERES31800 manual Installation of carbon filter, Connecting the water hose

Connecting the water hose.

The water coupling is connected to a water tap with an external 3/4 inch thread.

This work is to be carried out by a skilled plumbing installation technician. The refrigerator is to be connected with a shut-off cock. There are different type-approved taps and tap assemblies on the market.

The water hose must not be cracked, squeezed or be in tight bends.

If you require a longer water hose than that supplied, then a VDE-approved 150 38 85-02/0 supply hose should be used.

Before the refrigerator is taken into use in its final location, ensure that the water connection has been correctly carried out, that there is no leakage at the connection to the refrigerator water valve or to the water tap, and that the

four spacers are properly in position, see the illustration.

We recommend that the refrigerator is placed on a "run-off" mat intended for refrigerators and freezers, which makes it easier to detect possible leakage.

Installation of carbon filter

On delivery the carbon filter is placed in a plastic bag to secure the length of the carbon filter life. The filter should be placed behind the grill before the cabinet is turned on.

The cover can be opened by simultaneously pressing the lever on the right of the grill (1) and turning the cover outward (2). The carbon filter is then mounted in the slot found in the back of the cover.

The filter should be handled carefully so fragments do not loosen from the surface.