Control Panel

4electrolux

Environment Protection

This appliance does not contain gasses which could damage the ozone layer, in either its refrigerant circuit or insula- tion materials. The appliance shall not be discarded together with the urban re- fuse and rubbish. The insulation foam contains flammable gases: the appli-

ance shall be disposed according to the applicable regulations to obtain from your local authorities. Avoid dam- aging the cooling unit, especially at the rear near the heat exchanger. The ma- terials used on this appliance marked by the symbol are recyclable.

Fridge Control panel

ON/OFF

1.Pilot light

2.ON/OFF switch

3.Temperature regulator (warmest)

4.Temperature indicator

5.Temperature regulator (coldest)

6.Action Cool light

7.Action Cool switch

Switching on

Insert the plug into the wall socket. Press the ON/OFF switch .

The Pilot Light will light up.

Switching off

Press ON/OFF switch until a countdown from -3 -2 -1 is completed.

The temperature indicator switches off. The Pilot light switches off.

Temperature regulation

The temperature can be adjusted between +2°C and +8°C.

By pressing the Temperature regulators, the current temperature setting flashes on the Temperature indicator. It is possible to modify the setting temperature only with flashed indicator. To set a warmer tempera- ture, press warmest Temperature regulator. To set a colder temperature, press coldest Temperature regulator. The Temperature in- dicator displays the newly selected temper- ature for a few seconds and then shows again the inside compartment temperature. The newly selected-temperature must be reached after 24 hours.

5 6 7

Caution! During the stability period by the first starting the temperature displayed can not correspond to the setting temperature. During this time it is possible that the temperature displayed is lower than the setting temperature.

Temperature indicator

During normal functioning the Temperature indicator shows the temperature inside the fridge.

Important! Difference between the temperature displayed and temperature setting is normal. Especially when:

•a new setting has recently been selected.

•the door has been left open for a long time.

•warm food has been placed in the com- partment.

Action Cool function

The maximum performance is obtained by setting the Action Coolfunction. It’s recom- mended when loading large quantities of food.

You can activate the Action Cool function by pressing the Action Cool switch.

The Action Cool light will light up.

Important! The internal temperature goes down to +2°C.

After about 6 hours the Action Cool func- tion switches off automatically.