Electrolux EFT925 If the hood does not function, Cleaning, Changing the lighting elements

Page 8

Attention

Failure to observe the rules for cleaning the appli- ance and changing and cleaning the filters may cause fires. Therefore, we recommend observing these instructions.

Cleaning

To clean the outside of the hood use a cloth mois- tened with denatured alcohol or neutral liquid detergents. Never use products containing abrasives.

Changing the lighting elements

l Disconnect the hood from the electricity.

 

l Open the grid (Fig. 12).

 

l Replace the damaged part with one of equal

Fig. 14

rating.

 

If the hood does not function

Before you make contact to service

Check that the power plug is connected to the wall power outlet and that no fuse is blown. Do not do any operations that can cause hazard or damage to the product. If the problem remains contact your dealer or an approved service company

Remember to save the purchase recite and the

Warranty card (only used in some countries)

Service and spare parts

Service and spare parts you will get via your dealer or service company.

When you order service or spare parts you should be ready to give the product number and model denomination. This information you will find on the rating label.

Take away the grease filter and you will find the rating label behind.

Model:

Product number:

Date of purchase:

8

Image 8
Contents EFT Contents Safety instructions At installation and serviceCongratulations to your new Cooker Hood At use of cooker hoodStandard accessories included Description of the applianceFunction ExhaustingSpecial accessories InstallationUsing the hood Exhausting modeRecirculation mode with carbon filter Mounting under cupboardMaintenance Cleaning Before you make contact to serviceService and spare parts If the hood does not functionTechnical data Model EFTPage Page LI1PJA Ed /01