Dolby Laboratories HT2030 manual VCR Setup VCR Setup Menu, Channel Selection

Press MENU to display the MAIN menu.

VCR Setup (Continued)

The VCR Setup Menu

1

2 Press v/V to display the VCR SETUP menu, then press SELECT/ENTER.

The VCR SETUP menu will appear.

SET CLOCK
TIMER RECORD		SCREEN DISPLAY:	ON
		LANGUAGE:
CHANNEL SETUP		AUDIO MODE:
		BROADCAST TYPE:
VCR SETUP		AUDIO OUTPUT:
SELECT	ENTER	SELECT	ADJUST
TO EXIT PRESS		TO EXIT PRESS

3 Press v/V to choose the desired option on the VCR SETUP menu. Then press b/B to choose the desired setting.

SCREEN DISPLAY

The DVD+VCR on-screen displays can be turned on or off. Press b/B to switch SCREEN DISPLAY between ON and OFF.

LANGUAGE

The DVD+VCR on-screen menus can be displayed in English, Spanish, or French.

Press b/B to switch LANGUAGE among ENGLISH, SPAN- ISH and FRENCH.

AUDIO MODE

The DVD+VCR has two separate audio playback systems: 1) High-quality VHS Hi-Fi system; and 2) Standard NORMAL mono system. The same audio is generally recorded on both systems. The VHS Hi-Fi system plays on separate (left and right) channels, and the NORMAL system plays monaural sound. The normal track is always played so the cassette can be played on a DVD+VCR that does not have VHS Hi-Fi.

Press b/B to switch AUDIO MODE between HI-FI and

NORMAL .

BROADCAST TYPE (STEREO/SAP/MONO)

Multi-channel Television Sound (MTS) carries stereo and/or Second Audio Program (SAP) audio signals. You only need to set BROADCAST TYPE when both MTS stereo and SAP signals are received. When only one of these MTS signals is received, the DVD+VCR will automatically select the corresponding receiving mode (Stereo or SAP) regardless of the selected position. For nor- mal operation, the display should be in the STEREO position. The DVD+VCR will then record a STEREO program when available, and only record a MONO program if the program is not in stereo. For weak STEREO and/or SAP broadcasts, changing the display to MONO may give clearer sound.

Press b/B to switch BROADCAST TYPE among STEREO, SAP, and MONO.

AUDIO OUTPUT (STEREO/LEFT/RIGHT)

Used during playback [when AUDIO MODE (HI-FI/NORMAL) is in HI-FI position] for selecting the audio output signals from the AUDIO OUT terminals (L ch and R ch), and RF.OUT.

This display setting should normally be left in the stereo posi- tion, so that when a stereo tape is played, the stereo sound will be heard through the left and right channels. If a mono tape is played and the audio output is set to stereo, the same mono sound will be heard from both left and right channels.

Press b/B to switch AUDIO OUTPUT among STEREO, LEFT, and RIGHT.

Channel Selection

The DVD+VCR is equipped with a frequency synthesized tuner capable of receiving up to 181 channels. These include VHF channels 2-13, UHF channels 14-69 and CATV channels 1-125.

Before you begin:

Connect the DVD+VCR to the desired type of antenna or cable TV system, as shown on page 11.

AUTO CHANNEL PROGRAMMING

1 Press MENU to display the MAIN menu.

2 Press v/V to select the CHANNEL SETUP menu, then press SELECT/ENTER.

The CHANNEL SETUP menu will appear.

SET CLOCK
TIMER RECORD		AUTO CHANNEL SEARCH
		CHANNEL SOURCE:
CHANNEL SETUP		ADD/DEL CH:
		INPUT SELECT:
VCR SETUP
SELECT	ENTER
TO EXIT PRESS
Press V to choose the INPUT SELECT option,
3 then press b/B to select TUNER.

Press b/B repeatedly to switch among TUNER, LINE1 and LINE2.

4 Press v/V to choose the AUTO CHANNEL SEARCH option, then press b/B to find channels.

The tuner will automatically cycle through all available channels in the area and place them in the tuner’s memory.

5 After AUTO CHANNEL SEARCH is complete, make sure the CHANNEL SOURCE is set appro- priately in the CHANNEL SETUP menu. Press v/V to choose CHANNEL SOURCE, then press b/B to select TV or CATV.

Remember, TV is for the over-the-air antenna reception, and CATV is for cable or wireless cable connection.

6 Press MENU to return to the TV screen.

7 Use CH/TRK (v/V) or CHANNEL (v/V) on the front panel to cycle the DVD+VCR through the channels in memory.

TO ADD OR ERASE CHANNELS FROM MEMORY

This feature allows you to add or erase channels from memory manually.

1Press V to choose the ADD/DEL CH option on the CHANNEL SETUP menu. Press b/B to select a channel to add or erase.

2Press SELECT/ENTER to add or erase the channel. Repeat steps 1 and 2 to add or erase channels.

3Press MENU to return to the TV screen.

20