What to do if ...
Symptom |
| Possible Cause |
| Remedy |
|
|
|
|
|
|
|
|
|
|
| Appliance is not switched |
| Switch on the appliance. | |
|
| on. |
| |
|
|
|
| |
|
|
|
|
|
|
| Mains plug is not plugged |
| Insert mains plug. |
|
| in or is loose. |
| |
|
|
|
| |
Appliance does not work. |
|
|
|
|
| Fuse has blown or is | Check fuse, replace if | ||
|
| defective |
| necessary. |
|
|
|
|
|
|
|
| Mains malfunctions are to | |
|
| Socket is defective. |
| be corrected by an electri- |
|
|
|
| cian. |
Appliance cools too much.
The food is too warm.
Temperature display shows a square.
Temperature is set too cold.
Temperature is not proper- ly adjusted.
Door was open for an extended period.
A large quantity of warm food was placed in the appliance within the last 24 hours.
The appliance is near a heat source.
There is a function fault.
Press „+“ (WARMER) button.
Please look in the “Starting up and Temperature regu- lation” section.
Open the door only as long as necessary.
Turn the temperature regulator to a colder set- ting temporarily.
Please look in the “Installation location” section.
Please inform your local Service Force Centre. Do not open the door of the appliance again.
Interior lighting does not work.
Heavy build up of frost, possibly also on the door seal.
Light bulb is defective.
Door seal is not air tight (possibly after reversing the door).
Please look in the “Changing the light bulb” section.
Carefully warm the leaking sections of the door seal with a hair dryer (on a cool setting). At the same time shape the warmed door seal by hand such that it sits correctly.
20