|
|
|
|
| What to do if ... | |
|
|
|
|
|
|
|
| Symptom |
| Possible Cause |
| Remedy |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| The compressor does not |
|
|
|
|
|
| start immediately after |
| This is normal, no error has |
| The compressor starts after |
|
| changing the temperature |
| occurred. |
| a period of time. |
|
| setting. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Switch off COOLMATIC |
|
|
|
|
|
| manually, or wait to set |
|
| Temperature cannot be set |
| COOLMATIC function |
| the temperature until the |
|
|
| switched on. |
| function has reset auto- |
| |
|
|
|
|
| ||
|
|
|
|
| matically (refer also to |
|
|
|
|
|
| COOLMATIC section). |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Water on the floor or on |
| Water drain hole is |
| See the “Cleaning and |
|
| storage shelves. |
| blocked. |
| Care” section. |
|
|
|
|
|
|
|
|
Changing the Light Bulb
Warning! There is a risk of electric shocks! Before changing the light bulb, switch off the appliance and unplug it, or disconnect from the mains supply.
Light bulb data:
☞1. To switch off, press the ON/OFF button until the mains power light goes out.
2.Unplug the mains plug.
3. To change the light bulb, undo the screw.
4.Press the light bulb cover as shown and slide it towards the rear of the appli- ance.
5.Change the faulty light bulb.
6.Refit the light bulb cover and the screw.
7.Switch the refrigerator back on.
21