10electrolux
2.Press on the rear hook and at the same time slide the lamp cover in the direction of the arrow.
3.Replace the lamp with one of the same power and specifically designed for household appliances. (the maximum power is shown on the light lamp cover)
4.Install the lamp cover by sliding it into its original position.
5.Connect the mains plug to the mains socket.
6.Open the door. Make sure that the lamp comes on.
Closing the door
1.Clean the door gaskets.
2.If necessary, adjust the door. Refer to "In- stallation".
3.If necessary, replace the defective door gaskets. Contact the Service Center.
TECHNICAL DATA
Dimension of the recess
Height
Width
Depth
The technical information are situated in the rating plate on the internal left side of the ap- pliance and in the energy label.
1030 mm
560mm
550mm
INSTALLATION
Read the "Safety Information" carefully for your safety and correct operation of the appliance before installing the appliance.
Positioning
Install this appliance at a location where the ambient temperature corresponds to the cli- mate class indicated on the rating plate of the appliance:
Climate
class
SN
N
ST
T
Ambient temperature
+10°C to + 32°C +16°C to + 32°C
+16°C to + 38°C +16°C to + 43°C