4electrolux
Service
•Any electrical work required to do the serv- icing of the appliance should be carried out by a qualified electrician or compe- tent person.
•This product must be serviced by an au- thorized Service Centre, and only genu- ine spare parts must be used.
Environment Protection
This appliance does not contain gasses which could damage the ozone layer,
in either its refrigerant circuit or insula- tion materials. The appliance shall not be discarded together with the urban re- fuse and rubbish. The insulation foam contains flammable gases: the appli- ance shall be disposed according to the applicable regulations to obtain from your local authorities. Avoid dam- aging the cooling unit, especially at the rear near the heat exchanger. The ma- terials used on this appliance marked by the symbol 
are recyclable.
CONTROL PANEL
1 | 2 | 3 | 4 | 5 | 6 | 7 |
1Fridge Pilot light
2Fridge ON/OFF switch (Ein/Aus)
3Fridge temperature regulator, + button
4Fridge temperature indicator
5Fridge temperature regulator, - button
6Schnellkühlen indicator
7Schnellkühlen button
Switching on the fridge
1.Insert the plug into the mains socket.
2.Press ON/OFF switch .
3.The Pilot Light will light up.
Switching off the fridge
1.Keep ON/OFF switch pressed for more than 5 seconds.
2.A countdown on the temperature indica- tor, from
Temperature setting buttons
The temperature is adjusted using the tem- perature setting buttons. These buttons are connected to the temperature indicator.
•The temperature indicator is switched over from the indicator of the ACTUAL temperature (Temperature indicator is illu- minated) to the indicator of the DESIRED temperature (Temperature indicator flash-
es) by pressing one of the Temperature setting buttons.
•Each time one of the two buttons is press- ed again the DESIRED temperature is ad- justed by 1°C. The DESIRED temperature must be reached within 24 hours.
If neither button is pressed, the temperature indicator automatically switches back after a short period (approx. 5 sec.) to the indica- tor of the ACTUAL temperature.
DESIRED temperature means:
The temperature that has been selected for inside the fridge. The DESIRED temperature is indicated by flashing numbers.
ACTUAL temperature means:
The temperature indicator shows the cur- rent temperature inside the fridge. The AC- TUAL temperature is indicated with illumina- ted numbers.
Temperature indicator
The temperature indicator shows several in- formation:
•During normal operation, the temperature currently present in the fridge (ACTUAL temperature) is displayed.
•When the temperature is being adjusted a flashing display indicates the fridge tem- perature currently set (DESIRED tempera- ture).
4) If a water connection is foreseen