Electrolux FAVORIT 88070 Setting the delay start, Aborting the rinsing cycle, Cancel delay start

Interrupting the dishwashing programme by opening the dishwash- er door

1 Hot steam may escape when the door is opened. There is a risk of scald- ing.

1.Open the door carefully. The dishwashing cycle will stop, in the display:

PLEASE CLOSE DOOR

2.Close the door. The cycle will continue.

Aborting the rinsing cycle

1.Press the RESET key combination. On the display: CONFIRM CANCEL ?

2.Press the OK/START button.

The cycle is stopped. On the display: CHOOSE CYCLE

3.If you want to start a new cycle, check whether there is any detergent in the dispenser.

3 Turning off the dishwasher will only interrupt a selected dishwashing cycle, not cancel it. The cycle will recommence after turning the dish- washer back on again.

Setting the delay start

3 With the delay start you can delay the start of a dishwashing cycle for between 1 and 19 hours. First of all set the delay start and then the de- sired dishwashing cycle.

1.Go to the DELAY START option; see section “Adapting an option/set- ting”.

2.Set the period by which you wish to delay the start in hours. In the symbol line of the display .

3.Press the OPTION button, to change to the Programmes menu.

4.Select programme and start.

First of all the pre-set time delay until the start runs down. In the dis- play you see the time remaining until the start of the dishwashing cy- cle. After the time delay until the start has elapsed, the dishwashing cycle starts automatically, the symbol goes out.

Cancel delay start:

You can cancel a time-delay in progress at any time.

1.Press the RESET key combination. On the display: CONFIRM CANCEL ?

2.Press the OK/START button.

28 The delay start is cancelled. The set rinsing cycle will begin.