Audible signals
Audible signals have been introduced to help indicate which operations the dishwasher is performing:
-setting of the water softener
-end of programme
-intervention of an alarm due to malfunction
It is possible to deactvate the audible signals, using some of the programme buttons on the control panel.
Factory setting: | audible signals |
activated |
|
Deactivation/activation of the audible signals
1.Press the On/Off button. The dishwasher must be in setting mode.
2.Press simultaneously and keep pressed buttons 2 and 3 until the lights of the buttons 1, 2 and 3 start flashing.
3.Press button 3, the lights of buttons 1 and 2 turn off while the light of button 3 goes on flashing. The digital display indicates the current setting.
control panel | electrolux | 11 |
4.To change the current setting, press again button 3, the digital display will indicate the new setting.
Audible signals deactivated
Audible signals activated (factory set)
5.To memorise the operation, switch off the dishwasher by pressing the On/Off button.