External cleaning
Clean the external surfaces of the machine and control panel with a damp soft cloth. If necessary use only neutral detergents. Never use abrasive products, scouring pads or solvent (acetone, trichloroethylene etc....).
Prolonged periods of non- operation
If you are not using the machine for any period of time you are advised to:
1.Unplug the appliance and then turn off the water;
2.Fill the rinse aid dispenser;
3.Leave the door ajar to prevent the formation of any unpleasant smells;
4.Leave the inside of the machine clean.
Frost precautions
Avoid placing the machine in a location where the temperature is below 0°C. If this is unavoidable, empty the machine, close the appliance door, disconnect the water inlet pipe and empty it.
Moving the machine
If you have to move the machine (moving house etc....):
1.Unplug it;
2.Turn the water tap off;
3.Remove the water inlet and discharge hoses;
4.Pull the machine out together with the hoses.
Avoid over tilting the machine during transport.
16 | PMC02UK |