Electrolux ESI 600 manual Securing under a counter

Page 28

Adjusting the door balance

The door of the dishwasher is balanced when it is open in any position.

Fitting the decor panel may sometimes affect this balance. In this case it will be necessary to adjust the balance as follows:

Half-open the door and regulate the screws located on the kick plate.

By screwing or unscrewing these screws, the tension of the door balancing springs is increased or decreased respectively.

The weight of the panel should be within the limits given in "The furniture door" otherwise balancing the door will not be possible.

II08

Securing under a counter

Open the door; vertically insert the two mounting brackets (A) on the front part of the dishwasher and turn them 90° (see figure). Secure the brackets to the counter by means of two 3.5 x 16 screws provided.

Important: the dishwasher must be secured against tilting. Therefore, make sure that the counter it is fitted under, is suitably secured to a fixed structure (adjacent kitchen cabinets, wall).

 

90°

 

A

 

A

1

2

II18

 

28

PFI08UK

Page 27 Page 29
Image 28
Page 27 Page 29
Contents
Instruction Book Important safety information Interest of the environmentContents Description of the appliance On/Off indicator light On/Off pushbutton Control panelDoor handle Programme selector dialSetting the water softener To adjust the water softener LevelBefore use Levels 3Filling with salt To fillAdjusting the dose Rinse aidFilling with Rinse Aid Ensure that the lid is closed after every refillUse of detergent To fill the dishwasher with detergent proceed as followsLower basket Loading your applianceCutlery basket Upper basket Adjusting the height of the upper basketTo move to the higher position proceed as follows To save energy Hints and tipsFor best washing results Washing programmes OffOperating sequence Check the filtersCheck that there is rinse aid and salt Load the dishes Start the programmeMaintenance and cleaning Internal cleaningCleaning the large filter After each washExternal cleaning Frost precautionsProlonged periods of non- operation Moving the machineSymptom Solution Something not workingService and spare parts 0990Guarantee Conditions Standard guarantee conditionsEuropean Guarantee This guarantee does not coverElectrolux Service Force Midlands Installation instructions Technical specificationsRemove all packaging before positioning the machine Water supply connectionsLocknut must be correctly fitted to avoid water leaks Water outlet hose connection Green and Yellow Earth Blue Neutral Brown Live Electrical connectionProceed as follows Building-in LevellingFurniture door Prepare the panel as followsSecuring under a counter Kitchen plinth adjustment Page
Top Page Image Contents