Electrolux ESF 46710 user manual Activation/deactivation of the Multitab function

This appliance is equipped with the "Multitab function", that allows the use of the "Multitab" combi detergent tablets.

These products are detergents with a com- bined cleaning, rinsing and salt functions. They can also contain other different agents depending on which kind of tablets you choose ("3 in 1", "4 in 1", "5 in 1" etc...). Check whether these detergents are suitable for your water hardness. See the manufac- turers instructions.

Once this function is selected it will remain active for all following wash programmes. With the selection of this function the inflow of rinse aid and salt from each respective supply container is automatically deactivated and also the indicator lights for salt and rinse aid are deactivated.

When using the "Multitab function", the cycle durations may change. If this is the case, the running time for the programme is automat- ically updated on the digital display.

Activate/deactivate the ''Multitab func- tion'' before the start of a washing pro- gramme.

Once the programme is running, the "Multitab function " can NO longer be changed. If you want to cancel the "Mul- titab function " you have to cancel the programme setting and then deactivate the ''Multitab function''. In this case you have to set a washing programme (and desired options) again.

Activation/deactivation of the Multitab function

Simultaneously press and hold the two Mul- titab buttons (function buttons D and E ) until the Multitab indicator light comes on. This means that the function is active.

To deactivate the function press the same buttons again until the indicator light corre- sponding to the Multitab function symbol goes off.

If the drying results are not satisfac- tory we suggest that you:

1.Fill up the rinse aid dispenser with rinse aid.

2.Activate the rinse aid dispenser.

3.Set the rinse aid dosage to position 2.

•The activation/deactivation of the rinse aid is only possible with the Mul- titab function active.

Activation/deactivation of the rinse aid dispenser

1.Press the On/Off button. The dishwasher must be in setting mode.

2.Simultaneously press and hold function buttons B and C , until the lights of func- tion buttons A , B , and C start flashing.

3.Press function button B , the lights of function buttons A and C go off while the light of function button B continues to flash. The digital display indicates the cur- rent setting.