Electrolux ESF 46710 user manual Electrical connection, Environment concerns, Packaging material

24electrolux

Our appliances are supplied with a se- curity device to protect against the re- turn of dirty water back into the machine. If the spigot of your sink has a "no return valve" incorporated this can prevent the correct draining of your dishwasher. We therefore advise you to remove it.

To avoid water leakage after installation make sure that the water couplings are tight.

Warning! Safety standards require the appliance to be earthed.

Prior to using the appliance for the first time, ensure that the rated volt- age and type of supply on the rating plate match that of the supply where the appliance is to be installed. The fuse rating is also to be found on the rating plate.

Always plug the mains plug into a correctly installed shockproof sock- et.

Multi-way plugs, connectors and ex- tension cables must not be used. This could constitute a fire hazard through overheating.

If necessary, have the domestic wir- ing system socket replaced. In case that the electrical cable has to be replaced, contact your local Service Force centre.

The plug must be accessible after the appliance has been installed. Never unplug the appliance by pull- ing on the cable. Always pull the plug.

The manufacturer accepts no liabil- ity for failure to observe the above safety precautions.

The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local council, your household waste disposal service or the shop where you purchased the product.

Packaging material

The packaging materials are environmentally friendly and can be recycled. The plastic components are identified by markings, e.g. >PE<, >PS<, etc. Please dispose of the packaging materials in the appropriate con- tainer at the community waste disposal fa- cilities.

Warning! When a unit is no longer being used:

•Pull the plug out of the socket.

•Cut off the cable and plug and dispose of them.

•Dispose of the door catch. This pre- vents children from trapping them- selves inside and endangering their lives.