Electrolux 60800 manual Prior to using for the first time, Adjust the Water Softener, Salt

Operating Instructions

Prior to using for the first time

Prior to using for the first time, remove all the clips with which the dish racks are secured for transport.

Then perform the following steps: 0 1. Adjust the water softener

2.Fill with Salt for the Water Softener

3.Fill with Rinse Aid

Adjust the Water Softener

	To avoid the scale deposits on the dishes and in the dishwasher, the
	dishes must be washed with soft, i.e. low lime content, water. The dish-
	washer therefore has a built-in water softener, in which tap water from
	a hardness of 4 °d (German degree) is softened with the aid of special
	salt.
3	You water supplier will be able to inform you on the hardness and
	hardness range of the water in your area.

0Adjust the water softener to the setting given in the table that corre- sponds to the hardness of the water in your area. The water softener can be adjusted in 10 steps.

	Water Hardness			Adjust	Indication on the
in °d1)		in ppm 2)	Range	to Hardness Setting	Multi-Display
41-50	730-900			9	H 9
35-40	630-720			8	H 8
31-34	550-620		IV	7	H 7
27-30	480-540			6	H 6
23-26	410-470			5	H 5
19-22		330-400	III	4	H 4
15-18		260-320		3*	H 3
11-14		190-250	II	2	H 2
4-10		70-180	I/II	1	H 1
under 4		under 70	I	0	H 0
				no salt necessary
1)(°d) German degree, measure of the hardness of water
2)(ppm) Parts Per Million
*factory setting

11