Electrolux 60800 manual Daily Use, Adjusting Rinse Aid Dosing

Page 15

	Operating Instructions
	Adjusting Rinse Aid Dosing
3	As the dishes are washed rinse aid is released from the dispenser into
	the wash water. The dose is factory set at 4, and can be adjusted from

1 to 6. Only change the setting if streaks, milky spots or dried on water marks are visible on glasses or crockery.

0 1. Open the door of the dishwasher.

2.Press the rinse aid compartment release button with your finger.

3. Fully open the rinse aid compartment lid.

4. Set the dose level.

5. Close the lid and press until it locks into place.

6.If rinse aid has run out, wipe up with a cloth.

In Daily Use

•Check the salt and rinse aid levels.

•Load cutlery and dishes into the dishwasher

•Fill with dishwasher detergent

•Select a wash programme suitable for the cutlery and dishes

•Start the wash programme

Image 15

Contents Ökofavorit Pass them on to any subsequent owner of the appliance Tips on using the applianceDear customer Please read these user instructions carefullyContents Installation and Connection Instructions General Safety Safety InstructionsInstallation, Connection and Placing into Operation Child SafetyCorrect Use POM For polyoxymethylene, e.g. plastic clips DisposalDisposing of the Packaging Material Disposal of Old AppliancesEconomical and Ecological Dishwashing Appliance Features and Control Panel Multi-Display can display Control PanelHardness range of the water in your area Prior to using for the first timeAdjust the Water Softener Salt Operating Instructions Turning it anticlockwise Filling with Salt for the Water SoftenerFill with dishwasher salt Use dishwasher salt Open the door, remove the lower RackFill with rinse aid Filling with Rinse AidOugh rinsing, spot and streak free drying Age the applianceDaily Use Adjusting Rinse Aid DosingNot be washed in the dishwasher Loading Cutlery and DishesForks in the cutlery tray Loading CutleryTioned horizontally in the upper basket Place knives, small spoons and smallWork surface If you use the grid insert, it is notTo ensure that the cutlery basket Both parts of the two part handleLoad large and heavily soiled dishes in the lower rack Loading Pans, Frying Pans Large PlatesLoading Cups, Glasses and Coffee Services Raising the Upper Basket Adjusting the Height of the Upper BasketLowering the Upper Basket Type Lowering the Upper BasketFill with detergent Filling with DetergentDetergent Recommendations Bio Wash Programmes and Concentrated DetergentsSoiling Selecting the Wash Programme Programme TableChanging the wash programme Changing/Interrupting/CancellingStart the Wash Programme Wash ProgrammeDishwasher Setting or Changing the Delay Start TimerCancelling the wash programme Changing the delay startImmediately after the end of the programme Switching Off the DishwasherLoad Sensing Sensor Logic Emptying the DishwasherCleaning the Filter Care and CleaningStances What to do, ifSymptom Possible Cause Solution Error messagesDishes are wet and dull There are problems with the operation of the dish- washerWash results are not satisfactory Dishes are still dirtyTechnical Data Lower rinse aid dosingThere are dried water drops on the glasses and dishes Sample loading arrangements Upper basket without cutlery trayLower basket with cutlery basket Cutlery basket Installing the Dishwasher Free-Standing AppliancesCannot be kinked or crushed Unscrew the screws 1 from the elbows on the back side Connect the inlet hose Connecting the DishwasherWater Connection Permitted water pressureWater drain Appliance is automatically pumped out Leak Prevention SystemChanging a fuse Electrical ConnectionConnections Guarantee Conditions Page 08705 929 Customer CareCalls may be recorded for training purposes AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG