Electrolux 60800 Setting or Changing the Delay Start Timer, Dishwasher, Changing the delay start

Page 26

Operating Instructions

	Interrupting the wash programme by opening the door of the
	dishwasher
1	Hot steam may escape from the appliance when opening the door.
	Open the door carefully.
0 1.	Open the door of the dishwasher. The wash programme stops.

2.The indicator for the programme that is currently running extinguishes.

3.Close the door. The wash programme continues.

Cancelling the wash programme

0 1. Press the button for the current wash programme and hold it pressed. The programme indicator for the current wash programme flashes for a few seconds and then extinguishes.

2.Release the programme button, the wash programme is cancelled.

3	A selected programme is only interrupted by switching off the dish-
	washer, it is not cancelled. The wash programme is continued when the

dishwasher is switched on again.

Setting or Changing the Delay Start Timer

Using the delay start timer you can:

1.Press the ON/OFF button.

2.Press the DELAY TIMER button until the required delay (inhours) is flashing on the multi-display.

3.Press the button for the desired wash programme. The multi-display now displays the number of hours until the wash programme starts.

4.The wash programme starts automatically at the end of the time delay set.

Changing the delay start:

As long as the wash programme has not started, you can change the delay start set by pressing the DELAY TIMER button.

26

Image 26

Contents Ökofavorit Please read these user instructions carefully Tips on using the applianceDear customer Pass them on to any subsequent owner of the applianceContents Installation and Connection Instructions Child Safety Safety InstructionsInstallation, Connection and Placing into Operation General SafetyCorrect Use Disposal of Old Appliances DisposalDisposing of the Packaging Material POM For polyoxymethylene, e.g. plastic clipsEconomical and Ecological Dishwashing Appliance Features and Control Panel Control Panel Multi-Display can displaySalt Prior to using for the first timeAdjust the Water Softener Hardness range of the water in your areaOperating Instructions Use dishwasher salt Open the door, remove the lower Rack Filling with Salt for the Water SoftenerFill with dishwasher salt Turning it anticlockwiseAge the appliance Filling with Rinse AidOugh rinsing, spot and streak free drying Fill with rinse aidAdjusting Rinse Aid Dosing Daily UseLoading Cutlery and Dishes Not be washed in the dishwasherPlace knives, small spoons and small Loading CutleryTioned horizontally in the upper basket Forks in the cutlery trayBoth parts of the two part handle If you use the grid insert, it is notTo ensure that the cutlery basket Work surfaceLoading Pans, Frying Pans Large Plates Load large and heavily soiled dishes in the lower rackLoading Cups, Glasses and Coffee Services Lowering the Upper Basket Adjusting the Height of the Upper BasketLowering the Upper Basket Type Raising the Upper BasketFilling with Detergent Fill with detergent Bio Wash Programmes and Concentrated Detergents Detergent RecommendationsSelecting the Wash Programme Programme Table SoilingWash Programme Changing/Interrupting/CancellingStart the Wash Programme Changing the wash programmeChanging the delay start Setting or Changing the Delay Start TimerCancelling the wash programme DishwasherEmptying the Dishwasher Switching Off the DishwasherLoad Sensing Sensor Logic Immediately after the end of the programmeCare and Cleaning Cleaning the FilterWhat to do, if StancesError messages Symptom Possible Cause SolutionDishes are still dirty There are problems with the operation of the dish- washerWash results are not satisfactory Dishes are wet and dullThere are dried water drops on the glasses and dishes Technical DataLower rinse aid dosing Lower basket with cutlery basket Cutlery basket Sample loading arrangementsUpper basket without cutlery tray Cannot be kinked or crushed Installing the DishwasherFree-Standing Appliances Unscrew the screws 1 from the elbows on the back side Permitted water pressure Connecting the DishwasherWater Connection Connect the inlet hoseWater drain Leak Prevention System Appliance is automatically pumped outElectrical Connection Changing a fuseConnections Guarantee Conditions Page Calls may be recorded for training purposes 08705 929Customer Care AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG