Electrolux CHDD 8795, DD 8794 Maintenance and care, Cleaning the hood, Metal grease filter

Maintenance and care

•The hood must always be disconnected from the electricity supply before beginning any maintenance work.

Cleaning the hood

•Clean the outside of the hood using a damp cloth and a mild deter- gent.

•Never use corrosive, abrasive or flammable cleaning products.

•Never insert pointed objects in the motor’s protective grid.

•Wash the outside surfaces using a delicate detergent solution. Never use caustic detergents or abrasive brushes or powders.

•Only ever clean the switch panel and filter grille using a damp cloth and delicate detergents.

•It is extremely important to clean the unit and change the filters at the recommended intervals. Failure to do so will cause grease deposits to build up that could constitute a fire hazard.

Metal grease filter

•The purpose of the grease filters is to absorb grease particles which form during cooking and it must always be used, either in the external extraction or internal recycling function.

Attention: the metal grease filters must be removed and washed, either by hand or in the dishwasher, every four weeks.

•To access the grease filter,

first remove the front panels

which conceal the grease Extract filter.

Removing the front panels:

Extract the small panel, rotate upwards and unhook. Repeat the operation for all the small panels. Fig. 4.

Unhook

Bild 3

Fig. 4

59