Oven function
Defrost
electrolux 7
Application
For defrosting e. g. flans and gateaux, butter, bread, fruit or other frozen foods.
Clock Functions
•Countdown 
- See appropriate chapter on setup. A signal sounds after the time has elapsed. This function does not affect the functioning of the oven.
•Cook time 
- is used to set the desired period of cooking time.
•End time 
- when set the appliance is turned off at desired time.
•Time 
- shows the current time.
How to use the clock functions
•After a function has been selected, the corresponding function indicator flashes for about 5 seconds. During this period, the desired times can be set using the in-
crease | or decrease |
| button. |
|
•When the desired time has been set, the function indicator continues to flash for ap- prox. 5 seconds. After that the function in- dicator is then lit. The set time begins to run.
•Press any of the buttons to stop the audi- ble signal.
•The desired oven function and tempera-
ture can be selected before or after the
clock functions Cook time 
and End
time 
are set.
•When the cooking process is completed, turn the oven function dial and the tem- perature selector back to the OFF position.
Countdown 
1.Press the Mode 
button repeatedly un- til the function indicator Countdown 
flashes.
2.Using the increase 
or decrease button set the desired Countdown (max. 2 hours 30 minutes).
3.After approx. 5 seconds the display
shows the time remaining. The function indicator Countdown 
lights up.
4.When the time has elapsed, the function indicator flashes and an audible signal sounds for 2 minutes. The signal can be stopped by pressing any button.
Cook time 
1.Press the Mode 
button repeatedly un- til the function indicator Cook time 
flashes.
2. Using the increase | or |
|
| decrease |
| ||||
button set the desired cooking time. | ||||
After approx. 5 seconds the display re- | ||||
turns to showing the current time. The | ||||
function indicator Cook time | lights | |||
up. |
|
|
|
|
When the time has elapsed, the function indicator flashes, an audible signal sounds for 2 minutes and the oven switches itself off.
3.The signal and the programme can be stopped by pressing any button.
End time 
1.Press the Mode 
button repeatedly un- til the function indicator End time 
flashes.
2. Using the increase | or |
| decrease |
| |||
button set the desired | |||
After approx. 5 seconds the display re- | |||
turns to showing the current time. The | |||
function indicator End time | lights up. | ||
When the time has elapsed, the function indicator flashes, an audible signal sounds for 2 minutes and the oven switches itself off.
3.The signal and the programme can be stopped by pressing any button.
Cook time 
and End time 
combined
Cook time 
and End time 
can be used simultaneously, if the oven is to be switched on and off automatically at a later time.
1.Using the Cook time 
function, set the time required for cooking the dish.
2.Using the End time 
function, set the time at which the dish should be ready.
The function indicators Cook time 
and End time 
light up and the current time is shown in the display.