16electrolux
Replacing the glass door panels
1.Slide the glass door panels one after the other into the retainers from above at an angle and then lower the panels.
The two smaller panels should be inser- |
|
|
ted first, then the larger panel. | C | D |
E
2. Hold the door strip (B) on both sides, align
it with the inner edge of the door and press the door strip (B) into the upper edge of the door.
3. Open the door as far as it will go.
B
90°
4. Fold the clamp levers on both door hing- es (A) down into their original position.
On the open side of the door strip (B) there is a guide bar (C). This must be pressed between the outer side of the door and the corner (D). The seal (E) must audibly click into place.