Electrolux EHD 60150 IAU user manual Automatic switch off, Cooking surface, Control panel

Page 13

electrolux 13

Automatic switch off

Cooking surface

If after switching on the cooking surface, a heat setting is not set for a cooking zone within approx. 10 seconds, the cooking surface automatically switches itself off.

If one or more sensor fields are covered by objects (a pan, etc.) for longer than approx. 10 seconds, a signal sounds and the cooking surface switches off automatically.

If all cooking zones are switched off, the cooking surface automatically switches itself off after approx. 10 seconds.

Control panel

When the appliance is switched off, if one or more of the sensor fields on the control panel are covered for more that 10 seconds, an acoustic signal sounds. The acoustic signal switches itself off automatically when the sensor fields are no longer covered.

Induction cooking zones

In the case of overheating (e.g. when a

saucepan boils dry) the cooking zone automatically switches itself off. is

displayed. Before being used again, the cooking zone must be set to 0 and cooled down.

If cookware that is not suitable is used,

lights up in the display and after 2 minutes the indicator for the cooking zone switches itself off.

If one of the cooking zones is not switched off after a certain time, or if the heat setting is not modified, the relevant cooking zone switches off automatically. is displayed. Before being used

again, the cooking zone must be set to

.

Heat setting

Switches off after

1 - 2

6 hours

3 - 4

5 hours

5

4 hours

6 - 9

1.5 hours

 

 

Image 13
Contents Induction hob Electrolux. Thinking of you Contents Safety instructions With indicator Switch-off indicatorDescription of the Appliance Cooking surface layout Control panel layoutSensor field Function Touch Control sensor fieldsDisplays Display DescriptionResidual heat indicator Switching the appliance on and offOperating the appliance Control barTo switch on Setting the heat settingLocking/unlocking the control panel Turning the STOP+GO function on and offHeat setting Warm-up time Minsec Using the automatic warm-up functionStep Control panel Display Switching on the child safety device Using the child safety deviceSwitching off the child safety device Overriding the child safety devicePower Management Switching the power function on and offHeat setting selected is Will go outCountdown timer Using the timerFunction Condition Outcome after the time Automatic cut-outStep Control panel field Acoustic signal Step Control panel IndicatorStep Control panel field Display Heat setting Switches off after Automatic switch offCooking surface Control panelCookware for induction cooking zones Tips on Cooking and FryingTips on energy saving Cookware material SuitableHeat Cooking Examples of cooking applicationsTing Cleaning the appliance after each use Cleaning and CareRemove Imme- when the appliance has Type of dirt Removing depositsWhat to do if … Problem Possible cause RemedyWiring system If after switching on again Number are displayed Electronics faultService department Operating noisesPackaging material DisposalOld appliance Electrical Connection Installation InstructionsSticking the seal in the rabbet Assembly Electrolux EHD60150I 949 592 Rating Plate230 50 Hz General Terms and Conditions Guarantee/Customer ServicePrivacy Limitation of LiabilityImportant Notice TresService 867 202 661-B-060309-02