Electrolux SIG 500 installation instructions For your safety

Page 10

The hotplate

S I G 5 0 0

For your safety

Take care to avoid burns and scalds when you are reaching across the hotplate.

Use pans with flat bases. They are more stable than pans which are warped.

Do not use pans with very heavy handles which cause the pan to tip.

Put pans on the centre of the burners.

Position pan handles so they cannot be accidentally knocked.

Take extra care when you are deep fat frying. Do not cover the pan with a lid.

Do not leave a pan unattended. If the pan catches fire, leave it where it is and turn off all controls.

Place a damp cloth or a fitting lid over the pan to smother the flames.

Never put water on the fire.

Leave the pan to cool for 30 minutes.

If you are using a Wok we recommend it has a flat base as it will stand stable on the pan supports. If you use a round based Wok with a collar support, the collar must be of the open wire work type. A closed collar will affect the performance of the burner. Before you use the Wok make sure that the collar is stable on the pan supports. Always follow the instructions that come with the Wok.

8Do not use the lid as a work surface or chopping board. This could damage the glass and reduce its strength.

10

Image 10
Contents SIG For your safety IntroductionContents Lighting the cooker Hotplate & GrillOven To turn off any burnerHeat control High settingGrill Cooking positions Preheating Positioning food on the gridGrill pan and handle Grill pan is supplied with a removable handleHotplate Burner sizesFor your safety Helpful hints Heat zones OvenOven shelves Baking trays and dishes RoastingCondensation Oven cooking chart Mins. per ½kg 1lb and 25 mins 30 40 mins 15 25 minsRolls and buns 10 20 mins To set the time of day Electronic minute minderMinute minder To use the minute minderTo cancel the minute minder Slow cooking Food preparation slow cookingThaw thoroughly before cooking Do not cook casseroles over 3kg 6lbLeft over food should be cooled quickly and refrigerated Care and cleaning For your safety HotplateGrill When replacing hotplate burner partsClean the grill frequently using hot soapy water Crown to body Do not try to force the crown on to the bodyOven Oven cleaning cycle GeneralCleaning between the outer and inner door glass To remove the outer glassLocation Cleaning The Door GlassInstalling the cooker Make sure that a stability bracket is fittedHeight to hotplate 900mm 920mm Cooker dimensionsPositioning Width 550mm DepthConnecting to the electricity supply General information For your safetyMoving your cooker General information What is wrong and why? CheckReplacing the oven light bulb Servicing For your safety Gas Consumers CouncilInstallation Instructions Ignition DimensionsConnections GrillImportant Safety Requirements Provision for VentilationLocation of Appliance Levelling the Appliance Parts RequiredFitting the Stability Bracket Connecting to GAS Connection to the Electricity SupplyChecking the Hotplate Pressure TestingChecking the Grill Checking LID SHUT-OFF DeviceChecking the Oven General NoteSIG 500 Contents Check List Description