Electrolux SIG 414 Pressure Testing, Checking the Grill, Checking the Hotplate

Page 42

If the wiring is extended or a completely new cable fitted a 3-pin 13 amp plug should be fitted. (See Fig.4a). Connect the wires as follows:

BROWN to the Live Terminal. BLUE to the Neutral Terminal.

GREEN and YELLOW to the Earth Terminal.

As the colours of the wires in the mains lead which you fit may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

The wire which is GREEN and YELLOW must be connected to the terminal in the plug which is marked with the letter 'E' or by

the earth symbol or coloured GREEN or GREEN and

YELLOW.

The wire which is coloured BLUE must be connected to the terminal which is marked with the letter 'N' or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter 'L' or coloured RED.

FIT A 3 AMP FUSE TO THE PLUG HOLDER.

Ensure that the supply cable cannot get caught by the stability bracket.

Fig.4a

Plug in the appliance.

6. PRESSURE TESTING

1 The oven injector is used as a pressure test point.

Remove the oven furniture. Remove oven burner box retaining clips (one spring clip from each side) and remove box front cover. Replace one clip back into the right hand side of the burner box.

Remove oven burner by removing the spring clip from the right hand side of the oven burner and slide burner off injector whilst easing it forward and taking care not to strain the F.S.D. phial.

2.Connect the pressure gauge to the oven injector.

3.Check the supply pressure by turning the thermostat on and one hotplate tap full on and light the appropriate burner. The pressure should be either:-

(i)For Natural Gas 20mbar

(ii)For LP.GasThe pressure must be set to 28 mbar for use on butane or 37 mbar for use on propane.

4.Turn off the taps, disconnect the pressure gauge and replace oven burner and cover, ensuring that the F.S.D. phial is correctly located into the bracket on the burner.

5.Check operation of oven.

7. CHECKING THE GRILL

Place the grill pan containing the grid, with the handle attached, into the grill compartment. Light the grill burner by turning the grill tap to its full on position and pushing the ignition button. As soon as the burner is lit the button can be released.

8. CHECKING THE HOTPLATE

Lift the lid. Fit the burner crowns and caps ensuring that they are correctly seated. Fit the pan supports. Check each of the hotplate burners in turn by turning the hotplate tap to it's full on position and pushing the

ignition button. As soon as the burners are lit the button can be released.

9. CHECKING LID SHUT-OFF DEVICE

1.Lift the lid.

2.Turn one hotplate burner tap to its full on position and push the ignition button.

3.Close lid. There should now be no gas supply to the hotplate and the burner will go out.

4.Turn off the hotplate tap and lift the lid. The gas supply should now be restored to the hotplate. When the tap is turned on.

42

Image 42
Contents SIG For your safety IntroductionContents Lighting the appliance Hotplate & GrillOven To turn off any burnerGrill Prior to using the grillBrowned it on the high setting Heat controlCooking positions PreheatingPositioning food on the grid Grill pan and handle Grill pan is supplied with a removable handleHotplate Burner sizesRapid Helpful hints Oven Heat zonesOven shelves Baking trays and dishes RoastingCondensation Oven cooking chart Mins. per ½kg 1lb and 25 mins 15 25 mins 30 40 minsRolls and buns 10 20 mins Fig1 Press buttons 1 and 2 together Bell SymbolIncrease control Button 1 to decrease or button 2 toTime press button At the end of the time period an audible Hours and 59 minutesRead 0.00, See Fig Release button 1 and press and hold Show in the display. See figSlow cooking Food preparation slow cookingThaw thoroughly before cooking Do not cook casseroles over 2.7kg 6lbCover food with a tight fitting lid or tin foil Left over food should be cooled quickly and refrigeratedCare and cleaning For your safety HotplateWhen replacing hotplate burner parts Grill and oven furnitureCrown to body Do not try to force the crown on to the body Grill Oven Oven is presentably clean Some staining will remain Oven cleaning cycleTurn the temperature up to GeneralCleaning between the outer and inner door glass To remove the outer glassLocation Cleaning The Door GlassInstalling the appliance Make sure that a stability bracket is fittedCurtains behind the appliance Appliance dimensionsPositioning Height to hotplate 900mm 920mmGeneral information For your safety Connecting to the electricity supplyMoving your appliance General information What is wrong and why? CheckG 4 1 Problem Service and spare parts 7 0 5 9 2 9 9 2Customer Care Department Installation Instructions Grill DimensionsConnections HotplateImportant Safety Requirements Provision for VentilationLocation of Appliance Parts Required Levelling the ApplianceFitting the Stability Bracket Connecting to GAS Connection to the Electricity SupplyChecking the Hotplate Pressure TestingChecking the Grill Checking LID SHUT-OFF DeviceMinute Minder Operation Checking the OvenTo SET the Time of DAY General NoteT E S T E S SIG414 Contents Check List Important Notice Telephone 0870 5 Part Number311591704

SIG 414 specifications

The Electrolux SIG 414 is a cutting-edge appliance that embodies the perfect blend of innovation, performance, and efficiency for modern kitchens. Designed to enhance culinary experiences, this model offers a variety of features that cater to the needs of both home chefs and professional cooks.

One of the standout features of the Electrolux SIG 414 is its advanced induction cooking technology. This method uses electromagnetic energy to directly heat pots and pans, providing rapid and precise temperature control. As a result, users benefit from quick boiling times, even heat distribution, and energy efficiency, making cooking tasks faster and more economical. The induction cooktop is also equipped with automatic pan detection, ensuring that energy is only used when compatible cookware is placed on the surface.

The design of the SIG 414 is another notable characteristic. Its sleek and modern aesthetic fits seamlessly into any kitchen decor, and the glass surface is easy to clean, minimizing maintenance time. The intuitive touch controls make it simple to adjust settings, while the ergonomic layout ensures that all functions are easily accessible during meal preparation.

Safety features are paramount in the design of the Electrolux SIG 414. It includes a child lock to prevent accidental changes in settings and an automatic shut-off function for when the appliance is not in use. The unit also boasts residual heat indicators, providing a visual cue when the cooking surface is still hot, further enhancing user safety.

In terms of versatility, the Electrolux SIG 414 offers multiple cooking zones of various sizes. This allows users to employ a range of cookware, including larger pots and pans for family meals or smaller cookware for individual dishes. The booster function is an added convenience, providing a quick burst of power to achieve high temperatures in a flash.

Moreover, the SIG 414 is designed with energy efficiency in mind, aligning with modern sustainable practices. Its induction technology not only reduces cooking time but also minimizes wasted energy, making it an environmentally friendly choice.

In summary, the Electrolux SIG 414 is a sophisticated induction cooktop that prioritizes performance, safety, and design. With its advanced cooking technology, user-friendly features, and contemporary aesthetic, it represents the future of cooking appliances, making it an outstanding choice for anyone looking to elevate their culinary endeavors.