Electrolux SIG 414 Checking the Oven, To SET the Time of DAY, Minute Minder Operation

Page 43

10. CHECKING THE OVEN

1.Turn the oven thermostat to Mk.9 and check that there is sparking from the ignition system. This should continue until the oven burner is alight.

2..When the oven burner lights up the sparking should cease, there should be a low gas rate at first to the

oven burner which is the flame supervision device (F.S.D.) by pass rate.

3.When the F.S.D. phial has heated up it opens the F.S.D. valve and the main gas stream flows to the burner.

4.After 1 minute check that the flame covers the full width of the burner and is stable.

5.Set the oven thermostat to Mk.2, close the oven door and check that after about 10 minutes the flame has reduced in size.

6.Turn off the thermostat and check that the oven flames go out.

11. TO SET THE TIME OF DAY

To set the clock (See Fig 5).

FIG.5

1.

Turn on electricity supply and ensure that the thermostat is in the

 

 

 

 

 

 

 

 

 

 

 

off position.

 

 

 

 

 

 

 

 

 

 

 

2.

Press buttons (1) and (2) together.

 

 

 

 

 

 

 

 

 

 

3.

Release buttons, 0.00 will appear in the display.

 

 

 

 

 

 

Within 5 seconds press button (2), 12.00 will show in the display.

 

 

 

 

 

4.

Within 5 seconds press and hold either button (1) to decrease

 

 

 

 

 

 

 

 

 

 

 

or button (2) to increase the time until the correct time of day on

 

 

 

 

 

 

the 24 hour clock is reached, e.g.14.30.

 

 

 

 

 

 

2

 

1

12. MINUTE MINDER OPERATION

The minuet minder gives an audible reminder at the end of any period of cooking up to 23 hours and 59 minutes.

To set press button (1) and the display will read 0.00.

Release button (1) and press and hold button (2). The display will count up in one minute intervals until the interval to be timed is reached, eg 30 minutes. If necessary press and hold button (1) to achieve the correct time interval.

The bell symbol will show in the display.

The minute minder will begin to count down once set. The time of day will show in the display. To show the remainder of the cook time press button (1).

At the end of the time period an audible signal will sound for up to 2 minutes. The bell symbol will flash and the time of day will show in the display.

To stop the sound press button (1). The bell symbol will go out and show the time of day eg 15.00.

GENERAL NOTE

Instruct the user on how to use the appliance and its ignition system. Refer the user to the wording in the inside cover which gives advice on the safe operation of the appliance.

43

Page 42 Page 44
Image 43
Page 42 Page 44
Contents SIG Introduction For your safetyContents Hotplate & Grill Lighting the applianceTo turn off any burner OvenHeat control Prior to using the grillBrowned it on the high setting GrillPreheating Cooking positionsPositioning food on the grid Grill pan is supplied with a removable handle Grill pan and handleBurner sizes HotplateRapid Helpful hints Heat zones OvenOven shelves Roasting Baking trays and dishesCondensation Oven cooking chart Mins. per ½kg 1lb and 25 mins 30 40 mins 15 25 minsRolls and buns 10 20 mins Button 1 to decrease or button 2 to Bell SymbolIncrease control Fig1 Press buttons 1 and 2 togetherShow in the display. See fig Hours and 59 minutesRead 0.00, See Fig Release button 1 and press and hold Time press button At the end of the time period an audibleFood preparation slow cooking Slow cookingLeft over food should be cooled quickly and refrigerated Do not cook casseroles over 2.7kg 6lbCover food with a tight fitting lid or tin foil Thaw thoroughly before cookingHotplate Care and cleaning For your safetyGrill and oven furniture When replacing hotplate burner partsCrown to body Do not try to force the crown on to the body Grill Oven General Oven cleaning cycleTurn the temperature up to Oven is presentably clean Some staining will remainTo remove the outer glass Cleaning between the outer and inner door glassMake sure that a stability bracket is fitted Cleaning The Door GlassInstalling the appliance LocationHeight to hotplate 900mm 920mm Appliance dimensionsPositioning Curtains behind the applianceConnecting to the electricity supply General information For your safetyMoving your appliance General information Check What is wrong and why?G 4 1 Problem 7 0 5 9 2 9 9 2 Service and spare partsCustomer Care Department Installation Instructions Hotplate DimensionsConnections GrillProvision for Ventilation Important Safety RequirementsLocation of Appliance Levelling the Appliance Parts Required Fitting the Stability Bracket Connection to the Electricity Supply Connecting to GASChecking LID SHUT-OFF Device Pressure TestingChecking the Grill Checking the HotplateGeneral Note Checking the OvenTo SET the Time of DAY Minute Minder OperationT E S T E S SIG414 Contents Check List Telephone 0870 5 Part Number311591704 Important Notice
Top Page Image Contents