Electrolux EKC6044 Care and Cleaning, Cleaning Materials, Cleaning the Outside of the Appliance

Page 21

CARE AND CLEANING

Before cleaning always allow the cooling fan to cool the appliance down before switching off at the electricity supply.

CLEANING MATERIALS

Before using any cleaning materials on your appliance, check that they are suitable and that their use is recommended by the manufacturer.

Cleaners that contain bleach should NOT be used as they may dull the surface finishes. Harsh abrasives and scourers should also be avoided. Multi-surface anti-bacterial cleaning products should not be used on the ceramic hob or on the surrounding trims.

CLEANING THE OUTSIDE OF THE APPLIANCE

Do not use abrasive cleaning materials e.g. Hob Brite, Brillo pads or scourers on painted or printed finishes as damage may occur. Regularly wipe over the control panel, doors and appliance sides using a soft cloth and hot soapy water. To prevent streaking finish with a soft cloth.

Stainless Steel cream cleaners are abrasive and should be avoided as they may dull the surface finish. Any spillage on the stainless steel finish must be wiped off immediately.

Do not attempt to remove any of the control knobs from the appliance as this may cause damage and is a safety hazard.

CLEANING THE CONTROL KNOBS AND HANDLES

It is strongly recommended that only hot soapy water is used for cleaning the control knobs and handles.

ANY OTHER CLEANING MATERIALS MAY DULL THE SURFACE FINISH.

REMOVING AND REPLACING THE WIREWORK RUNNERS

1.Remove all shelves and furniture from the oven.

2.Hold the wirework at the bottom, unclip from the cavity side and gently pull towards the centre of the oven.

3.Unhook the runner at the top and remove from the cavity.

4.To replace the runners, hook the wirework side runner into the cavity, slide back and press into place.

Ensure the wirework runners are firmly in position before replacing the oven shelves.

SIDE PANEL

CAVITY CENTRE

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Model EKC6044 /EKC6045 Installation Important Safety InformationContents SLIP-IN Electric Double Oven Description of the ApplianceFeatures Getting to Know Your ApplianceControl Panel Before Using the Appliance Timer HOW to SET the Time of DAYHOW to SET the Countdown To Cancel the Countdown Setting the Oven Timer ControlTo SET the Timer to Switch on and OFF Automatically To Cancel AN Automatic Programme To SET the Timer to Switch OFF onlyTo Return the Appliance to Manual Things to NoteUsing the HOB Ceramic HOBRecommended Saucepans Hints and Tips HOT HOB IndicatorGrill Using the GrillGrill PAN and Handle Ensure the handle is correctly locatedMins in total With the grid in the ‘high’ positionUsing the TOP Oven TOP OvenTo FIT the TOP Oven Shelf Hints and Tips Using the Main Oven Main OvenTo FIT the Main Oven Shelves Hints and Tips Oven Cooking Chart Meattemperature Roasting ChartUsing Defrost Feature Defrost FeatureCleaning Materials Care and CleaningCleaning the Outside of the Appliance Cleaning the Control Knobs and HandlesDaily Cleaning Cleaning the Ceramic HOBTo Remove More Stubborn Marks To Remove Burnt on SoilageAny of the above products may cause damage to the hob To Reduce HOB SoilageAerosol cleaners must not be used on Stayclean surfaces Cleaning Inside the Grill and Oven CompartmentsCleaning Between the Outer and Inner Door Glass Cleaning the DoorsReplacing AN Oven Light Bulb Grill, ovens and timer do not work Oven fan is noisy Oven temperature is too high or too lowSomething not WORKING? Service and Spare Parts This guarantee does not cover Guarantee ConditionsTechnical Details Installation Instructions Connect to 230 240V AC supply only Connecting to the Electricity SupplyPage Page Page Electrolux Major Appliances Addington WAY Luton Bedfordshire
Top Page Image Contents