electrolux 17
Gas Connection
Connection to the gas supply should be with either rigid or
The connection should be suitable for connecting to R 1/2 (1/2 BSP male thread).
When the final connection has been made, it is essential that a thorough leak test is carried out on the hob and installation.
Ensure that the main connection pipe does not exert any strain on the hob.
It is important to install the elbow correctly, with the shoulder on the end of the thread, fitted to the hob connecting pipe.
Failure to ensure the correct assembly will cause leakage of gas.
Location
The hob may be located in a kitchen, a kitchen/diner or bed sitting room, but not in a bathroom, shower room or garage.
Ensure that there is a minimum distance of 55 mm between the rear cut out edge and the wall.
A minimum distance of 450 mm must be left between the side edges of the cut out and any adjacent cabinets or walls.
The minimum distance combustible material can be fitted above the hob in line with the edges of the hob is 400
mm.If it is fitted below 400 mm a space of 50 mm must be allowed from the edges of the hob.
The minimum distance combustible material or a cooker hood can be fitted above the hob is 650 mm.
For appliances installed in the Republic of Ireland please refer to NSAI- Domestic Gas Installation I.S 813 Current Edition Section 7- Permitted Locations of Appliance.