Electrolux EHG 9832 manual Electrical connections, This HOB Must be Earthed

Page 23

electrolux 23

Electrical connections

Any electrical work required to install this hob should be carried out by a qualified electrician or competent person, in accordance with the current regulations.

THIS HOB MUST BE EARTHED.

The manufacturer declines any liability should these safety measures not be observed.

This hob is designed to be connected to a 230 V 50 Hz AC electrical supply.

Before switching on, make sure the electricity supply voltage is the same as that indicated on the hob rating plate. The rating plate is located on the bottom of the hob. A copy is attached on the back cover of this book.

The hob is supplied with a 3 core flexible supply cord incorporating a 3 amp plug fitted. In the event of having to change the fuse, a 3 amp ASTA approved (BS 1362) fuse must be used.

Should the plug need to be replaced for any reason, the wires in the mains lead are coloured in accordance with the following code:

Green and Yellow

-

Earth

Blue

-

Neutral

Brown- Live

!1) Connect the green and yellow (earth) wire to the terminal in the plug which is marked with the letter 'E' or the earth symbol or coloured green and yellow.

2)Connect the blue (neutral) wire to the terminal in the plug which is marked with the letter 'N' or coloured black.

FO 0390

3)Connect the brown (live) wire to the terminal in the plug which is marked with the letter 'L' or coloured red.

Upon completion there must be no cut, or stray strands of wire present and the cord clamp must be secure over the outer sheath.

A cut off plug inserted into a 13 amp socket is a serious safety (shock) hazard. Ensure that the cut off plug is disposed of safely.

Image 23
Contents Instruction booklet Electrolux Welcome to the world of Electrolux Contents During Use Important safety informationInstallation Child SafetyService ∀ Environmental Information Description of the hob Installation Triple crown burner OperationHob burners control knobs Lighting the burnersBurner Minimum Maximum Diameter Using the hob correctlyPan Supports Maintenance and CleaningHob Top Ignition electrode BurnersSomething not working? SymptomEngineer technical data Instructions for the InstallerType of GAS Location Important safety requirementsInstallation Gas Connection Cut out size Building over a kitchen unit with door BuildingBuilding over a cupboard or drawer Carry out the building in of the hob as follows Fitting the hob into the worktopThis HOB Must be Earthed Electrical connectionsPermanent Connection Wiring diagram Preliminary Electrical Systems Check Fault findingEarth Continuity Check Ignition System / Gas Ignition Commissioning Pressure TestingProcedure Minimum adjustmentMethod Conversion from natural gas to LPGExclusions Standard guarantee conditions0870 5 929 Service and Spare PartsEuropean guarantee Electrolux Electrolux 35693-2601 03/07 R.0