Food residue left in the oil must be removed before the fryer is used again because of fire risk!
If you should want to use both the grill and the fryer, for instance to make a beef steak with french fries, the following method may be used:
1.Prepare the fryer for use by removing the grill grid and box for lava blocks, and turn the grill elements upright. Heat the oil to 190˚C (Approx.
10minutes). Put the chips into the basket and lower it in the heated oil. Boil the chips almost ready (crispy an light brown). Hang the basket for dripping on the bracket and then place it on kitchen paper.
Switch off the fryer.
2.The grill is used as follows:
install the lava blocks box, lower the grill elements and lay on the grill grid. Preheat on setting 12 for about
Switch off the grill.
3.Then place the steaks on a serving platter and keep warm. The French fries can now be finished. Take off the grill grid. Turn up the grill elements and remove the lava block box. Use kitchen gloves as the grill is hot.
Turn the grill elements down along one
side and switch on the fryer. After a few minutes the oil is once again hot enough and the chips may be fried until they are crispy.
Dinner is now ready to be served..
13