Electrolux N 9 18 41-4 i Disposal, Remove transport safeguard, Appliance Packaging Information

Page 6

Disposal

Appliance Packaging Information

All materials are environmentally sound! They can be dumped or burned at an incinerating plant without danger!

About the materials: The plastics can be recycled and are identified as fol- lows:

>PE< for polyethylene, e.g. the outer covering and the bags in the interior. >PS< for polystyrene foam, e.g. the pads, which are all free of chlorofluo- rocarbon.

The carton parts are made from recycled paper and should be disposed of at a waste-paper recycling collection location.

Disposal of old Appliances

For environmental reasons, refrigeration appliances must be disposed of properly. This applies to your old appliance, and - at the end of its service life - for your new appliance as well.

Warning! Before disposing of old appliances make them inoperable. Remo- ve plug from mains, sever the power cable, remove or destroy any snap or latch closures. This eliminates the danger that playing children lock them- selves into the appliance (danger of suffocation!) or place themselves into other life-endangering situations.

Disposal:

The appliance may not be disposed of with domestic waste or bulky refu- se.

The refrigerant circuit, especially the heat exchanger at the back of the appliance, may not be damaged.

The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be han- ded over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correc- tly, you will help prevent potential negative consequences for the envi- ronment and human health, which could otherwise be caused by inap- propriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

Remove transport safeguard

The appliance and the interior fittings are protected for transport.

• Pull off the adhesive tape on the left and right side of the door.

• Remove all adhesive tape and packing pieces from the interior of the

6

appliance.

Image 6
Contents Santo N 9 18 41-4 Dear customer Contents Intended use SafetySafety of children Prior to initial start-upDaily Operation Case of malfunctionAppliance Packaging Information Remove transport safeguardDisposal Disposal of old AppliancesInstallation Installation LocationShelf holders Operating and indicator panel Fridge Temperature setting buttonsTemperature display Starting Up Setting the Temperature Plug the mains plug into the mains socketVariable Inner Door Interior AccessoriesStorage Shelves Moisture regulatorFresh food refrigeration Variable Storage BoxOperating and indicator panel appliance Ice pack Pressing button P the buzzer stopsAlarm reset button Switching the Appliance offFreezing and storing frozen food Defrosting Preparation of Ice CubesFreezing Calendar RefrigeratorCleaning and Care Do not use any abrasive cleansersEnergy Saving Tips What to do if Correcting MalfunctionsPress the fast freeze switch Regulations, Standards, Guidelines Changing the light bulbService and Spare Parts Customer Care DepartmentGuarantee Conditions Electrical Connection Your appliance needs air Housing dimensionsPositioning Reversing the doorPage Page Copyright by AEG