Shelf holders
Your appliance is equipped with shelf retainers that make it possible to secure the shelves during transporta- tion.
To remove them proceed as follows: Raise the shelf from the back, push it in the direction of the arrow until it is free and remove the retainers.
A |
B |
Installation
Installation Location
The appliance should be set up in a well ventilated, dry room.
Energy use is affected by the ambient temperature. The appliance should therefore
–not be exposed to direct sunlight;
–not be installed next to radiators, or other sources of heat;
–only be installed at a location whose ambient temperature corresponds to
the climate classification, for which the appliance is designed.
The climate classification can be found on the rating plate, which is loca- ted at the left on the inside of the appliance.
The following table shows which ambient temperature is correct for each climate classification: each climate classification:
Climate classification |
| for an ambient temperature of |
|
|
|
|
|
|
SN |
| +10 bis +32 °C |
|
|
|
N |
| +16 bis +32 °C |
|
|
|
ST |
| +18 bis +38 °C |
|
|
|
T |
| +18 bis +43 °C |
|
|
|
If the refrigeration appliance is installed next to another refrigerator or free- zer a clearance of 5 cm at the sides is required, in order to prevent the for- mation of condensation on the outside of the appliance.
Important: if the supply cord is damaged, it must be replaced by manufac- turer , its service agent or similarly qualified persons in order to avoid a hazard.
7