facilities in your area to recycle the appliance
The symbol 
on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative conse- quences for the environment and human health, which could other- wise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
Remove Transport Packaging
The appliance and the interior fittings are protected for transport.
•Remove all adhesive tape and packing pieces from the interior of the appliance.
Your appliance is equipped with shelf | A | |
| ||
retainers that make it possible to |
| |
secure the shelves during transporta- |
| |
tion. | B | |
To remove them proceed as follows: | ||
| ||
Move the shelf retainers in the direc- |
| |
tion of the arrow, raise the shelf from | C | |
the rear and push it forward until it |
| |
is freed and remove the retainers. |
|
Fitting the Door Handles
1. Screw the top handle bracket to the handle rod
(1). Fit the bottom handle bracket on the lower left- hand side of the door (2).
2.Fit the top handle bracket
on the top
Attention!
Do not overtighten the screws (max. 2 Nm) as you may damage the door handles.
6