Electrolux SANTO 70348 KG manual Starting Up Setting the Temperature, Holiday function

Page 8

During normal operation, the temperature currently present in the fridge (ACTUAL temperature) is displayed.

When the temperature is being adjusted a flashing display indicates the fridge temperature currently set (DESIRED temperature).

Starting Up - Setting the Temperature

1.Plug the mains plug into the mains socket.

2.Press ON/OFF button. The green mains pilot indicator illuminates. The appliances start.

3.Press either the “C“ or “E“ button. The temperature display switches over and the DESIRED temperature currently set flashes on the temperature display.

4.Set the required temperature by pressing the “C“ or “E“ buttons (see section "Temperature setting buttons"). The temperature display will immediately show the changed setting. Each time the button is pressed the temperatu- re is adjusted by 1 °C.

From a food safety point of view +5 °C should be considered sufficiently cold for storing food in the fridge.

5.Once the required temperature has been set, after a short period (approx. 5 sec.) the temperature display will change and again indicate the current ACTUAL temperature inside the fridge. The display will change from flashing to continuous illumination.

Information! When the setting is changed, the compressor does not start immediately if automatic defrosting is currently taking place. As the stora- ge temperature within the fridge is reached quickly you can store food immediately after switching on.

COOLMATIC

The COOLMATIC function is suited for quick cooling of large quantities of goods in the refrigerator.

1.The COOLMATIC function is switched on by pressing the COOLMATIC but- ton. The yellow light illuminates.

The COOLMATIC function now provides for intensive cooling. A DESIRED temperature of +2 °C is automatically selected. The COOLMATIC function is ended automatically after a period of 6 hours.

2.The COOLMATIC function can be ended manually at any time by pressing the COOLMATIC button again. The yellow light goes out.

Holiday function

The holiday function sets the temperature at +15°C. This function allows you to keep the refrigerator shut and empty during a long holiday period (e.g. the summer holidays) without the formation of a bad smell.

8

Image 8
Contents Santo 70348 KG Dear customer Contents Safety Safety of childrenPrior to initial start-up RefrigerantService DisposalAppliance Packaging Information Disposal of old AppliancesRemove Transport Packaging Fitting the Door HandlesFacilities in your area to recycle the appliance Fit the top handle bracketOperation and control panel Fridge Temperature setting buttonsTemperature display Starting Up Setting the Temperature Holiday functionInterior Accessories Adjusting the upper door rack D338Turning OFF the refrigeration compartment Storage shelvesThat may form on the bottom surface Fresh Food RefrigerationDrawer Operation and indicator panel Freezer Plug the mains plug into the mains socket Pressing button N the buzzer stopsTurning OFF the freezer compartment Alarm reset buttonSwitching the Appliance off Freezing and storing frozen food Symbols on the drawers show different types of frozen goods Preparation of Ice CubesFreezing Calendar Ice packsDefrosting RefrigeratorOutside of the appliance Cleaning and CareDo not use any abrasive cleansers After cleaning wipe with fresh water and rub dry Energy Saving TipsWhat to do if Correcting MalfunctionsChanging the light bulb Service and Spare Parts Customer Care DepartmentGuarantee Conditions Installation Electrical ConnectionRear spacers PositioningReversing the door Slide the bottom door off the centre hinge HRefit the bottom door Refit ventilation grille D, clipping it into placeMove the small plug from right to left Unscrew the top handle bracket from the handle rodRegulations, Standards, Guidelines Copyright by AEG