Epson TM-T85P manual Setting the DIP Switches, 14Installation

3.Press the PAPER FEED button to start the second part of the test, in which the printer prints a pattern using the built-in character set. It also performs several partial cuts and prints the following:

***completed ***

4.Then it performs a full cut and enters the normal mode.

Part of a sample self test is shown below:

TM-T85

TM-T85P

Setting the DIP Switches

You can change the print density or any of your interface settings by changing the DIP switch settings.

1. Make sure that the printer is off.

1-14Installation