Epson TM-T85P manual GS f n, 50Commands

Forth byte (paper sensor information)

Bit	Off/On	Hex	Decimal	Status for ASB
0	-	-	-	Undefined.
1	-	-	-	Undefined.
2	-	-	-	Undefined.
3	-	-	-	Undefined.
4	Off	00	0	Not used. Fixed to Off.
5	-	-	-	Undefined.
6	-	-	-	Undefined.
7	Off	00	0	Not used. Fixed to Off.

[Default] n = 0 when DIP SW 2-1 (serial interface) or DIP SW 1-3 (parallel interface) is off, n = 2 when DIP SW 2-1 (serial interface) or DIP SW 1- 3 (parallel interface) is on.

[Reference] DLE EOT, ESC u, ESC v, GS r

GS b n

[Name]	Turns smoothing mode on/off
[Format]	ASCII	GS	b	n
	Hex	1D	62	n
	Decimal	29	98	n
[Range]	0 ≤ n ≤ 255
[Description]	Turns smoothing mode on or off.
	When LSB of n is 0, smoothing mode is turned off.
	When LSB of n is 1, smoothing mode is turned on.
[Notes]	• Smoothing mode is available for built-in, user-defined characters.
	• Even if smoothing mode is turned on, smoothing is not performed
	when either of character width or character height id the normal
	size.
[Default]	n = 0
[Reference]	ESC !, GS !

GS f n

[Name]	Select font for Human Readable Interpretation (HRI) characters
[Format]	ASCII	GS	f	n
	Hex	1D	66	n
	Decimal	29	102	n
[Range]	0 ≤ n ≤ 1, 48 ≤ n ≤ 49

5-50Commands