![](/images/new-backgrounds/1149583/149583131x1.webp)
•The horizontal and vertical motion unit are specified by GS P. Changing the horizontal or vertical motion unit does not affect the current
•The horizontal and vertical motion unit are specified by GS P. Changing the horizontal or vertical motion unit does not affect the current
•The GS P command can chahge the horizotal (and vertical) motion unit. However, the value cannot be less than the minimum horizontal movement amount, and it must be in even units of the minimum horizontal movement amount.
•In standard mode, the horizontal motion unit is used.
•In page mode, the horizontal or vertical motion unit differs in page mode, depending on starting position of the printable area as follows:
1When the starting position is set to the upper left or lower right of the printable area using ESC T, the horizontal motion unit (x) is used.
2When the starting position is set to the upper right or lower left of the printable area using ESC T, the vertical motion unit (y) is used.
•The maximum
[Default] n=0 [Reference] GS P
ESC ! n
[Name] | Select print mode(s) |
|
| |
[Format] | ASCII | ESC | ! | n |
| Hex | 1B | 21 | n |
| Decimal | 27 | 33 | n |
[Range] | 0 ≤ n ≤ 255 |
|
|
|
[Description] Selects print mode(s) using n as follows:
Bit | Off/On | Hex | Decimal | Function | |
|
|
|
|
| |
0 | Off | 00 | 0 | Character font A( 12 ✕ 24) selected. | |
|
|
|
| ||
On | 01 | 1 | Character font B (9 ✕ 24) selected. | ||
| |||||
|
|
|
|
| |
1 | - | - | - | Undefined. | |
|
|
|
|
| |
2 | - | - | - | Undefined | |
|
|
|
|
| |
3 | Off | 00 | 0 | Emphasized mode not selected. | |
|
|
|
| ||
On | 08 | 8 | Emphasized mode selected. | ||
| |||||
|
|
|
|
|