Epson TM-T85P manual Control Commands, 2Commands

Control Commands

HT

[Name]	Horizontal tab
[Format]	ASCII	HT
	Hex	09
	Decimal	9
[Description]	Moves the print position to the next horizontal tab position.
[Notes]	• This command is ignored unless the next horizontal tab position
	has been set.
	• If the next horizontal tab position exceeds the printing area, the
	printer sets the printing position to [Printing area width + 1].
	• Horizontal tab positions are set with ESC D.
	• If this command is received when the printing position is at
	[printing area width + 1], the printer executes print buffer-full
	printing of the current line and horizontal tab processing from the
	beginning of the next line.
[Reference]	ESC D

LF

[Name]	Print and line feed
[Format]	ASCII	LF
	Hex	0A
	Decimal	10
[Description]	Prints the data in the print buffer and feeds one line based on the
	current line spacing.
[Note]	This command sets the print position to the beginning of the line.
[Reference]	ESC 2, ESC 3

FF

[Name]	Print and return to standard mode (in page mode)
[Format]	ASCII	FF
	Hex	0C
	Decimal	12
[Description]	Prints the data in the print buffer collectively and returns to standard
	mode.
[Notes]	• The buffer data is deleted after being printed.
	• The printing area set by ESC W is reset to the default setting.
	• The printer does not execute paper cutting.
	• This command sets the print position to the beginning of the line.
	• This command is enabled only in page mode.

[Reference] ESC FF, ESC L, ESC S

5-2Commands