![](/images/new-backgrounds/1149583/149583191x1.webp)
•The figure below shows the relationship between the bit-image data and dots to be defined.
y ✕ 8 dots
x ✕ 8 dots
d1 dy + 1
dy ✕ 2 + 1
dy
dy ✕ 2 | dx ✕ y ✕ 8 |
|
MSB
LSB
[Reference] GS /
GS / m
[Name] | Print downloaded bit image |
| ||
[Format] | ASCII | GS | / | m |
| Hex | 1D | 2F | m |
| Decimal | 29 | 47 | m |
[Range] | 0 ≤ m ≤ 3, 48 ≤ m ≤ 51 |
|
|
[Description] Prints a downloaded bit image in mode m. The modes selectable by m are as follows:
m | Mode | Dot density in vertical | Dot density in horizontal |
|
|
|
|
0, 48 | Normal | 180 DPI | 180 DPI |
|
|
|
|
1, 49 | 180 DPI | 90 DPI | |
|
|
|
|
2, 50 | 90 DPI | 180 DPI | |
|
|
|
|
3, 51 | Quadruple | 90 DPI | 90 DPI |
|
|
|
|
[Notes] | • This command is ignored if a downloaded bit image has not been | ||
| defined. |
|
|
•In standard mode, this command is effective only when the no data exists in the print buffer.
•This command is not affected by print modes (emphasized,
•If a downloaded bit image exceeds the printing area, the excess data is not printed.