Epson TM-T85P manual GS H n, 40Commands

• When the LSB of n is 1, white/black reverse mode is turned on.

[Notes] • In white/black reverse printing mode, print dots and non-print dots are reversed. (Characters are printed in white on a black background.)

•This command is available for built-in characters and user-defined characters.

•When white/black reverse printing mode is on, it also applied to character spacing set by ESC SP.

•This command does not affect bit image, downloaded bit image, bar code, HRI characters, and spacing skipped by HT, ESC $, and ESC \.

•This command does not affect the space between lines.

•White/black reverse mode has a higher priority than underline mode. Even if underline mode is on, it is disabled (but not canceled) when white/black reverse mode is selected.

[Default] n = 0

GS H n

[Name]	Select printing position for HRI characters
[Format]	ASCII	GS	H	n
	Hex	1D	48	n
	Decimal	29	72	n
[Range]	0 ≤ n ≤ 3, 48 ≤ n ≤ 51

[Description] Selects the printing position of HRI characters when printing a bar code.

n selects the printing position as follows:

n		Printing position
0, 48		Not printed
1, 49		Above the bar code
2, 50		Below the bar code
3, 51		Both above and below the bar code
	• HRI indicates Human Readable Interpretation.
[Note]	HRI characters are printed using the font specified by GS f.
[Default]	n = 0
[Reference]	GS f, GS K
GS I n
[Name]	Transmit printer ID
[Format]	ASCII	GS	I	n
	Hex	1D	49	n

5-40Commands