
ESC ✽ m nL n H [d]k
[Name] | Select |
|
| ||
[Format] | ASCII | ESC | ✽ | m nL nH [d]k | |
| Hex | 1B | 2A | m nL nH [d]k | |
| Decimal | 27 | 42 | m nL nH [d]k | |
[Range] | m = 0, 1, 32, 33 |
|
| ||
| 0 | ≤ nL ≤ 255 |
|
|
|
| 0 | ≤ nH ≤ 3 |
|
|
|
| 0 | ≤ d ≤ 255 |
|
|
|
[Description] Selects a
|
| Vertical Direction | Horizontal Direction (*1) | |||
|
|
|
|
|
| |
m | Mode | Number of | Dot | Dot | Number of Data | |
|
| Dots | Density | Density | (K) | |
|
|
|
|
|
| |
0 | 8 | 60 DPI | 90 DPI | nL + nH ✕ 256 | ||
|
|
|
|
|
| |
1 | 8 | 60 DPI | 180 DPI | nL + nH ✕ 256 | ||
|
|
|
|
|
| |
32 | 24 | 180 DPI | 90 DPI | (nL + nH ✕ 256 | ||
)✕3 | ||||||
|
|
|
|
| ||
|
|
|
|
|
| |
33 | 24 | 180 DPI | 180 DPI | (nL + nH ✕ 256 | ||
)✕3 | ||||||
|
|
|
|
| ||
|
|
|
|
|
|
•The nL and nH indicate the number of dots of the bit image in the horizontal direction. The number of dots is calculated by nL + nH ✕ 256.
•If the
•d indicates the
a dot or to 0 to not print a dot.
[Notes] • If the values of m is out of the specified range, nL and data following are processed as normal data.
•If the width of the printing area set by GS L and GS W less than the width required by the data sent with the ESC ✽ command, the following will be performed on the line in question (but the printing cannot exceed the maximum printable area):
➀The width of the printing area is extended to the right to accommodate the amount of data.
➁If step ➀ does not provide sufficient width for the data, the left margin is reduced to accommodate the data.
For each bit of data in