Epson TM-T85P manual ESC c

Bit	Off/On			Hex		Decimal	Function
6	Off		00		0		No error.
	On		40		64		Error occurs.
7	Off		00		0		Not used. Fixed to Off.
Bit 5:		Becomes on when printing stops due to paper-end detected by the
		paper roll end sensor or due to a paper near-end enabled by using
		the ESC c 4.
n = 3: Error status
Bit	Off/On			Hex		Decimal	Function
0	Off			00		0	Not used. Fixed to Off.
1	On			02		2	Not used.Fixed to On.
2	-			-		-	Undefined.
3	Off			00		0	No auto-cutter error.
	On			08		8	Auto-cutter error occurs.
4	On			10		16	Not used. Fixed to On.
5	Off			00		0	No unrecoverable error.
	On			20		32	Unrecoverable error occurs.
6	Off			00		0	No auto-recoverable error.
	On			40		64	Auto recoverable error occurs.
7	Off			00		0	Not used. Fixed to Off.

Bit 3: If these errors occur due to paper jams or the like, it is possible to recover by correcting the cause of the error and executing DLE ENQ n (1 ≤ n ≤ 2). If an error due to a circuit failure (e.g. wire break) occurs, it is impossible to recover.

Bit 6: When printing is stopped due to high print head temperature, bit 6 is

On until the print head temperature drops sufficiently. n = 4: Continuous paper sensor status

Bit	Off/On	Hex	Decimal	Function
0	Off	00	0	Not used. Fixed to Off.
1	On	02	2	Not used. Fixed to On.
2	Off	00	0	Paper roll near-end sensor. Paper adequate.

Commands 5-5