Epson TM-T85P manual Arranging the Interface Cable, Installing the Paper Roll

Arranging the Interface Cable

After you have plugged in all the cables, put the interface cable between the feet on the bottom of the printer and the cable-holding posts, as shown in the illustration below. This helps keep the cable securely fastened.

Installing the Paper Roll

The procedure describes how to install a paper roll for the first time. If you are replacing a used-up paper roll, see page 2-2.

Note:

Be sure to use roll paper that meets the specifications.

1. Open the printer cover. Do not open the auto cutter.

Note:

To prevent paper jams, make sure that the auto cutter tab is underneath the auto cutter holder as shown on the auto cutter label.

1-10Installation