Epson TM-T85P manual ESC % n, ESC & y c1 c2 x1 d1...dy x1...xk d1...dy xk

ESC % n

[Name]	Select/cancel user-defined character set
[Format]	ASCII	ESC	%	n
	Hex	1B	25	n
	Decimal	27	37	n
[Range]	0 ≤ n ≤ 255

[Description] Selects or cancels the user-defined character set.

	• When the Least Significant Bit (LSB) is 0, the user-defined
	character set is canceled.
	• When the LSB is 1, the user-defined character set is selected.
[Notes]	• When the user-defined character set is canceled, the internal
	character set is automatically selected.
[Default]	n = 0
[Reference]	ESC &, ESC ?

ESC & y c1 c2 [x1 d1...dy ✕ x1]...[xk d1...dy ✕ xk]

[Name]	Define user-defined characters
[Format]	ASCII		ESC	&	y c1 c2 [x1 d1...dy ✕ x1]...[xk d1...dy ✕ xk]
	Hex		1B	26	y c1 c2 [x1 d1...dy ✕ x1]...[xk d1...dy ✕ xk]
	Decimal		27	38	y c1 c2 [x1 d1...dy ✕ x1]...[xk d1...dy ✕ xk]
[Range]	y = 3
	32 ≤ c1 ≤ c2 ≤ 126
	0	≤ x ≤ 12 Font A (12 ✕ 24)
	0	≤ x ≤ 9 Font B (9 ✕ 24 )
	0	≤ d1 ... dy ✕ xk ≤ 255

k=c2-c1+1

[Description] Defines user-defined characters.

	• y specifies the number of bytes in the vertical direction.
	• c1 specifies the beginning character code for the definition, and c2
	specifies the final code.
	• x specifies the number of dots in the horizontal direction.
	• d is the dot data for the characters. The dot pattern is in the
	horizontal direction from the left side. Any remaining dots on the
	right side are blank.
	• The allowable character code range is from ASCII code 20H(32) to
	7EH(126) (95 characters).
	• The data to define a user-defined character is (y x x) bytes.
	• Set a corresponding bit to 1 to print a dot or 0 to not print a dot.
[Notes]	• It is possible to define multiple characters for consecutive
	character codes.
	If only one character is desired, use c1 = c2 .
	• This command can define different user-defined character
	patterns by each fonts. To select a font, use ESC !

Commands 5-11