Epson TM-T85P manual ESC D n k NUL, ESC E n

• The macro definition is not cleared.

ESC D [n] k NUL

[Name]	Set horizontal tab positions
[Format]	ASCII	ESC	D	[n] k	NUL
	Hex	1B	44	[n] k	00
	Decimal	27	68	[n] k	0
[Range]	1 ≤ n ≤ 255
	0 ≤ k ≤ 32
[Description]	Sets horizontal tab positions.
	• n specifies the column number for setting a horizontal tab position
	from the beginning of the line.
	• k indicates the total number of horizontal tab positions to be set.
[Notes]	• The horizontal tab position is stored as a value of [character width
	✕ n] measured from the beginning of the line. The character width
	includes the right-side character spacing, and double-width
	characters are set with twice the width of normal characters.
	• This command cancels the previous horizontal tab settings.
	• When setting n = 8, the print position is moved to column 9 by
	sending HT.
	• Up to 32 tab positions (k = 32) can be set. Data exceeding 32 tab
	positions is processed as normal data.
	• Transmit [n]k in ascending order and place a NUL code 0 at the
	end.
	• When [n]k is less than or equal to the preceding value [n]k-1, tab
	setting is finished and the following data is processed as normal
	data.
	• ESC D NUL cancels all horizontal tab positions.
	• When [n]k exceeds the number of characters printable on one line,
	the tab position set is equal to the maximum printable column
	plus 1.
	• The previously specified horizontal tab positions do not change,
	even if the character width changes.
[Default]	The default tab positions are at intervals of 8 characters (columns 9,
	17, 25,...) for the font A (12 × 24).
[Reference]	HT

ESC E n

[Name]	Turn emphasized mode on/off
[Format]	ASCII	ESC	E	n
	Hex	1B	45	n
	Decimal	27	69	n
[Range]	0 ≤ n ≤ 255

[Description] Turns emphasized mode on or off.

Commands 5-19