4.Move the positioning plate to the appropriate position and then tighten the adjusting screw, as shown below. Position 1 leaves the least paper on the roll, and position 6 leaves the most.
Detecting lever
The table below shows the approximate amount of adjustment of the diameter for each position.
Adjustment Position Number | Adjustment amount |
|
|
1 | Approx. 0 mm (0 in) |
|
|
2 | Approx. 2 mm (0.08 in) |
|
|
3 | Approx. 4 mm (0.16 in) |
|
|
4 | Approx. 6 mm (0.24 in) |
|
|
5 | Approx. 8 mm (0.32 in) |
|
|
6 | Approx. 10 mm (0.39 in) |
|
|
5.Be sure that the detecting lever moves freely after you finish the adjustment.
6.
