Bit | Off/On | Hex | Decimal | Function |
|
|
|
|
|
2 | - | - | - | Undefined. |
|
|
|
|
|
3 | - | - | - | Undefined. |
|
|
|
|
|
4 | - | - | - | Undefined. |
|
|
|
|
|
5 | - | - | - | Undefined. |
|
|
|
|
|
6 | - | - | - | Undefined. |
|
|
|
|
|
7 | - | - | - | Undefined. |
|
|
|
|
|
[Notes] | • When the printer is disabled, it ignores all data except for error- |
| recovery commands (DLE ENQ 1, DLE ENQ 2) until it is enabled |
| by this command. |
[Default] | n = 1 |
[Reference] | DLE ENQ |
ESC ? n
[Name] | Cancel |
| ||
[Format] | ASCII | ESC | ? | n |
| Hex | 1B | 3F | n |
| Decimal | 27 | 63 | n |
[Range] | 32 ≤ n ≤ 126 |
|
|
|
[Description] | Cancels |
[Notes] | • This command cancels the pattern defined for the character code |
| specified by n. After the |
| corresponding pattern for the internal character is printed. |
| • This command deletes the pattern defined for the specified code |
| in the font selected by ESC ! |
| • If a |
| character code, the printer ignores this command. |
[Reference] | ESC &, ESC % |
ESC @
[Name] | Initialize printer |
| |
[Format] | ASCII | ESC | @ |
| Hex | 1B | 40 |
| Decimal | 27 | 64 |
[Description] | Clears the data in the print buffer and resets the printer mode to the | ||
| mode that was in effect when the power was turned on. | ||
[Notes] | • The DIP switch settings are not checked again. | ||
| • The data in the receive buffer is not cleared. | ||
