Once set, the temperature display shows the current temperature inside the freezer.
Allow the cabinet to run for a period of 24 hours whenever the temperature setting is changed. This will allow the temperature to stabilise inside the cabinet.
It is not necessary to reset the temperature when the cabinet is switched on after it has been out of use. The electronics recalls the previously set temperature.
Temperature inside the freezer
To ensure that foodstuff will keep for a long time, be sure that the temperature inside the freezer is
The
Switching off
Switch off the cabinet by pressing the power switch. Keep the button pressed for approx. 1 second.
Power to the cabinet is completely interrupted only when the power plug is disconnected.
ACTION*FREEZE
Alarms and other features
Door open alarm
If the door remains open for more than about 1,5 minute, the red indicator lamp starts flashing and an audible alarm sounds.
To switch off the alarm:
Press the alarm
Temperature alarm
If the temperature rises above
To switch off the alarm:
Press the alarm
The red warning lamp goes out when the temperature inside the freezer again falls below
Find out what caused the alarm. See the chapter "Something not working".
Temperature memory
The temperature memory shows when an alarm has been triggered in the cabinet.
The temperature memory operates as follows: When the temperature inside the freezer again falls below
* | |
| ACTION FREEZE |
Electrolux 818 38
5